Loading ...
Loading ...
Loading ...
Setting Oven Controls 37
To cancel fresh clean:
Use caution when opening the oven door after fresh cleaning.
The oven may still be very hot and can cause burns. To avoid
possible burns, stand to the side of the oven when opening the
oven door to allow hot air or steam to escape. The oven bake
and broil elements may appear to have cooled after they have
been turned off. The elements may still be hot, and burns may
occur if these elements are touched before they have cooled.
IMPORTANT! Before restarting fresh clean, read the following
important notes:
• If your clock is set with the (default) 12 hr display mode, the
delay start for a fresh clean can only be programmed to
start up to 11 hours and 59 minutes after the time showing
in the display (be sure to set the clock to current time
before programming a delay start). To set a delay start
fresh clean to begin 12 or more hours (maximum is 23
hours and 59 minutes) after the time of setting, be sure to
first set the control in the 24 Hr display mode.
• If fresh clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another fresh clean
cycle.
Setting Delayed Fresh Clean
You may want to set the oven to perform a fresh clean at a later
time (up to 12 hours later). The end time key will determine
when the cleaning will stop. The end time must be set far
enough from the real time to allow for the type of clean cycle
you select, whether 2, 3, or 4 hours. Remember to add 30 to 40
additional minutes of cooling time before using the oven for
cooking.
If you want to set a delayed fresh clean to end between 12 and
24 hours, use the user pref key to set the 12hr energy saving
mode (ES) to Off and also set the clock (CLO) to the 24 hr
mode.
Setting for a heavy (4 hour) fresh clean cycle to end at 8:00
o’clock:
Do not leave small children unattended near the appliance.
During the fresh clean cycle, the outside of the oven can become
very hot to touch and can cause burns.
Do not force the oven door open when fresh clean is active. This
can damage the automatic door-locking system. Use caution
when opening the door after fresh cleaning. The oven may still
be very hot and can cause burns. To avoid possible burns, stand
to one side of the oven when opening the oven door to allow hot
air or steam to escape.
IMPORTANT! The kitchen area should be well ventilated. Use
an open window, ventilation fan, or exhaust hood during the first
fresh clean cycle to help eliminate the normal odors associated
the initial clean cycle.
1. Press CANCEL off.
2. If the fresh clean cycle has heated the oven to a high
enough temperature, Hot will appear in the display
(Figure 39). Allow enough time for the oven to cool and
the door to unlock before the oven door may be opened.
Figure 39: Oven too hot for door to unlock
1. Ensure the oven is empty and remove all oven racks and
racks support. Be sure the clock is set with the correct
time of day and the oven door is completely closed. In
this example, the time of day should be earlier than 4:00
o’clock.
2. Press OVEN to light up the available cooking modes
keys.
3. Press fresh clean.
4. Press heavy.
5. Press cook options. The end time icon
will appear.
6. Press end time. The numeric keypad will
illuminate.
7. Enter
8 0 0 on the numeric keypad.
8 0 0
8. Press START enter. The display will indi-
cate the time remaining before fresh clean
begins. When the fresh clean cycle begins,
the display will show the time remaining in
the fresh clean cycle.
Loading ...
Loading ...
Loading ...