Loading ...
Loading ...
Loading ...
Setting Oven Controls 29
Setting Multi Stage
Use multi stage to perform sequential cooking at the touch of a
button. Its purpose is to program a queue of up to three cooking
modes with individual cooking time and temperatures in a
sequence. This feature can be used with bake, broil, convection
bake, convection roast, convection broil, keep warm, and bread
proof. A cook time can be programmed with the desired cooking
mode and then queued. Be sure to follow recipe suggestions
when determining how to best set multi stage.
For example, the first stage might be a short duration with a
higher than normal cooking temperature to rapidly start the
cooking process. A second stage at a normal temperature
would allow for a longer, more normal cooking time. A final
stage can be set for holding the cooked food at serving temper-
ature by setting keep warm as the final stage. During stage 1
baking, the electronic control provides temperature visual
output in the display. During stage 2 and 3, the electronic
control displays the set temperature only.
IMPORTANT! A proper cook time and a set temperature are
required for every stage programming. At least two stages must
be programmed before multi stage cooking operation starts.
Any stage programmed with broil or convection broil cannot last
longer than 10 minutes.
IMPORTANT! Be sure to run the fast preheat feature to get the
oven up to the desired temperature before starting a multi stage
operation. See “Fast Preheat” on page 14.
To set a (2) multi stage feature for a casserole with:
• For stage 1, bake at 400°F (204ºC) for 1 hour; and
• For stage 2, brown, broil for at 500°F (260ºC) for 4 minutes,
using 2 stages of this feature:
Always use pot holders or oven mitts when working with a hot
oven. When baking, the oven interior and oven racks will
become hot enough to cause burns.
1. Place the food on the desired oven rack position and
slide into the oven.
2. Press OVEN to light up the available cooking modes
keys.
3. Press multi stage.
------ STAGE 1 appears in the display ------
4. Press bake.
5. Enter the temperature of 4 0 0
using the numeric keypad.
400
6. Press START enter.
7. Enter 6 0 minutes using the
numeric keypad.
60
8. Press START enter. This sets the
first stage of cooking and stage 2
will show in the display allowing you
to program the desired next step.
------ STAGE 2 -----
9. Press broil.
10. Enter 5 0 0 degrees using the
numeric keypad.
500
11. Press START enter.
12. Enter
4 minutes using the numeric
keypad.
4
13. Press START enter twice. This will
program the 2 stages and begin
cooking.
14. Press CANCEL off to stop multi
stage cooking at any time.
Loading ...
Loading ...
Loading ...