Loading ...
Loading ...
Loading ...
45TROUBLESHOOTING
ENGLISH
Error Codes
Problem Possible Cause Solutions
Water supply faucets are not
fully open.
• Make sure that the water faucets are fully open.
Water line hoses are kinked,
pinched, or crushed.
• Make sure that the hoses are not kinked or pinched. Be
careful when moving the washer.
Water inlet lters are clogged.
• Clean the inlet lters. See Maintenance in the Care and
Cleaning section.
Water supply pressure to
faucet or house is too low.
• Check another faucet in the house to make sure that
household water pressure is adequate and ow is not
restricted. Disconnect the inlet hose from the washer
and run a few gallons of water through the hose to
ush the water supply lines. If ow is too low, contact a
plumber to have the water lines repaired.
Water supply connected with
leak-limiting hoses.
• Hoses designed to limit leaks can trip falsely and
prevent the washer from lling. The use of leak limiting
hoses is not recommended.
Drain hose is kinked, pinched,
or clogged.
• Make sure the drain hose is free of clogs or kinks and is
not pinched behind or under the washer.
If the balance is not
successful, this error will be
displayed.
• The automatic attempt to rebalance the load was not
successful. The cycle has been paused to allow the
load to be manually adjusted.
The load is too small.
• Small loads may need additional items to be added to
allow the washer to balance the load.
Heavy articles are mixed with
lighter items.
• The load may have heavy items loaded with lighter
items. Always try to wash articles of somewhat similar
weight to allow the washer to evenly distribute the
weight of the load for spinning.
The load is out of balance.
• Manually redistribute the load if articles have become
tangled preventing the automatic rebalancing from
working properly.
Drawer is not closed properly.
• Close the drawer and press Start/Pause button to start
the cycle.
• If the drawer is closed and the error message is
displayed, call for service.
Loading ...
Loading ...
Loading ...