Loading ...
Loading ...
Loading ...
26 OPERATION
Control Panel on the Mini Washer
1 3
4
2
Power Button
Press to turn the washer on. Press again to
turn the washer off. Pressing the Power button
during a cycle will cancel that cycle and any load
settings will be lost. The drawer will unlock after
a brief pause.
Time and Status Display
Control Lock Indicator
When the control lock function is activated, the
LED lights up. When the control lock function is
set, all controls are disabled except for the Power
button. Once the control lock function is disabled,
the LED turns off.
Drawer Lock Indicator
The drawer lock indicator lights up once a cycle
has started. The indicator light stays on until the
cycle is paused, stopped or has nished.
Estimated Time Remaining
When a cycle is selected, the default time for that
cycle is displayed. This time changes as options
are selected.
NOTE
• The time shown is only an estimate. This
time is based on normal operating conditions.
Several external factors (load size, room
temperature, incoming water temperature,etc.)
can affect the actual time.
1
2
Start/Pause Button
Press this button to start the selected cycle. If
the washer is running, use the button on the right
side of the drawer to pause the cycle without
losing the current settings.
NOTE
• If Start/Pause is not pressed within 15 minutes
of selecting a cycle, the washer automatically
turns off and all cycle settings are lost.
Cycle Option Buttons
These buttons allow you to select special cycles
or additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for three
seconds.
3
4
Loading ...
Loading ...
Loading ...