Loading ...
Loading ...
Loading ...
17INSTALLATION
ENGLISH
Connecting the Drain Hose
NOTE
The drain hose should always be properly secured.
Failure to properly secure the drain hose can result
in ooding and property damage.
The drain must be installed in accordance with any
applicable local codes and regulations.
Make sure that the drain hose is not stretched,
pinched, crushed, or kinked.
Do not install the drain hose with the end lower than
29.5 inches (0.7 m) or higher than 96 inches (2.4
m) above the bottom of the washer or more than 60
inches (1.5 m) away from the washer.
Never create an airtight seal between the hose and
the drain with tape or other means. If no air gap
is present, water can be siphoned out of the tub
resulting in poor wash/rinse performance or clothing
damage.
1
Insert the band clamp (included in packing box)
onto the drain hose elbow.
Band clamp
2
With the hose leading up from the elbow, insert
the elbow onto the drain outlet on the back of the
Mini Washer.
3
Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
Band clamp
Using the Drain Hose Connector
1
Connect the drain hoses of the Main Washer and
the Mini Washer to the drain connector.
2
Insert the included band clamps onto the ends of
the two drain hoses.
3
Push the drain hoses rmly onto the drain
connector and adjust the band clamps to secure
the hoses.
Drain hose
Band clamp
Drain connector
CAUTION
Adjust the band clamps to prevent the hoses from
coming loose or leaking. Failure to do so could
result in ooding. Use of the drain connector helps
avoid siphoning, odors, or improper draining.
Option 1: Standpipe
1
Clip the hoses above the drain hose connector
into the elbow bracket.
Connect the elbow bracket within 4 inches (10
cm) of the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of the
washer.
Elbow bracket
No more than 4
inches (10 cm)
Loading ...
Loading ...
Loading ...