Loading ...
Loading ...
Loading ...
ENGLISH
21
Troubleshooting
The indicators do not light up.
After pressing the start/pause button the appliance sounds but it does not
work.
• The power plug is not connected correctly.
Check whether the power plug is plugged correctly and the outlet is working properly.
• The on/off button is not pressed.
Press the power on/off button .
• The chamber is assembled incorrectly.
The shaping disc, or the front panel is assembled incorrectly.
Make sure you follow the user manual to assemble all parts correctly.
• The preferred servings is not selected.
Make sure you have selected the servings before pressing the start/pause button.
The safety switch is triggered and the appliance suddenly stopped or suddenly
restarts during the processing.
• The front panel knob is loose.
Make sure the front panel is securely assembled.
• Excessive ingredients in the pasta and noodle maker.
The maximum amount of flour used for each batch is 500g. If more than 500g is added, reduce the
amount of flour before next batch.
During processing, the appliance stops. There is no alarm sound or flashes.
• The pasta and noodle maker has overheated due to long continuous working time.
Disconnect from the power, and allow the pasta and noodle maker to cool down. To better protect the
lifetime of the appliance, the continuous working time should be less than 45 minutes. You can restart
using the appliance after 15 minutes of rest.
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support or refer to page 24 for the consumer care number to call for
assistance.
Loading ...
Loading ...
Loading ...