Loading ...
Loading ...
Loading ...
PR3 User’s manual Page
7
1 – Clutch lever
The same as MX and MX PRO.
2 – Parking light on
With the light knob in this position,
parking lights in the headlight and
taillight will be switched on.
3 – Lights off
In this position, no lights will be
switched on.
4 – Low beam on
In this position, low beam light will be
on in the headlight and presence light
will be on in the taillight.
5 – High beam on
In this position, high beam light will be
on in the headlight and presence light
will be on in the taillight.
6 – Turn sign on
Turning this button left left turn lights
will be on. Turning right, right turn lights
will be on. To switch turn lights off,
place the button in middle position.
7 – Horn
To actuate horn, press this button.
! CAUTION !
In several countries, motorcycle
riding is only allowed with low beam
on! Respect your national
legislation!
! CAUTION !
Turn lights are not switched off
automatically! Be aware to switch
turn lights off after turning or
overtaking! Otherwise you will give
wrong information about your riding
to other drivers!
RIGHT HANDLEBAR
1 – Throttle grip
Engine speed is controlled by the
position of the throttle grip. Rotate it
toward you to increase engine speed;
turn it away to decrease engine speed.
2 – Front brake lever
Front brake is applied by squeezing
brake lever gently toward the throttle
grip.
3 – Electric start button
This button is used for turning the
starter motor. With the ignition switch in
the ON position, the transmission in
neutral, starter switch on, pull the clutch
lever and push the electric start button
to engage the starter motor and start
the engine.
4 – Emergency switch
This switch has two positions: to the left
enables engine running, to the right
stops engine running. Be aware that
this switch is switched ON for engine
starting.
! CAUTION !
If EMERGENCY SWITCH is not ON,
engine will not start! Start motor will
not be actuated!
! CAUTION !
The EMERGENCY SWITCH should
be used to stop the engine in
emergency situations! Do not use it
to stop the engine when driving
otherwise the ignition system will be
destroyed!
3
2
4
1
Loading ...
Loading ...
Loading ...