Loading ...
Loading ...
Loading ...
PR3 User’s manual Page
6
! CAUTIO
N !
Don’t try to ride with the switch on
LOCK position. The steering is
locked and control of the motorcycle
is impossible.
Don’t turn the ignition key to LOCK
position while driving!
Note: Start engine as soon as you turn
key to ON position. Otherwise battery
will loose power due to the
consumption of the digital speedometer
and headlight and taillight, if turned on.
DIGITAL SPEEDOMETER
The digital speedometer is not available
for the MX and MX PRO versions.
It gives information about instantaneous
speed and total or trip distance
travelled. Depending on the selling
market, speed and distance are
indicated in Kilometres or miles. If you
want to switch between these units,
please contact your AJP dealer.
To switch from total to trip distance
push button 1. To reset trip distance the
trip distance must be selected; then
push button 1 until the distance is reset
to zero.
LEFT HANDLEBAR
MX, MX PRO
1 – Clutch lever
The clutch lever is used for disengaging
the drive to the rear wheel when
starting the engine or shifting the
transmission gear. Squeezing the lever
disengages the clutch.
2 – Engine kill
To kill engine running, actuate this
button
.
3 – Engine run
To allow engine running, this button
must be actuated.
! CAUTION !
If ENGINE RUN button is not
actuated, engine will not start! You
can unload battery charge if you try
to start with ENGINE RUN button
not actuated!
TRAIL, ENDURO, ENDURO PRO,
SUPERMOTO, SUPERMOTO PRO
2
3
1
5
4
3
2
6
7
1
1
1
Loading ...
Loading ...
Loading ...