Loading ...
Loading ...
Loading ...
28
RECORDING
Recording from the built-in CD player (CD
Synchronised Recording System)
1
Press the ON/STAND-BY button to turn the power
on.
2
Load a cassette into the TAPE 2 cassette compart-
ment.
3
Press the CD button and load the desired disc.
Use the APMS function to store the tracks you want to
record in memory. (See page 14.)
4
Press the REC PAUSE ( ) button.
"SYNC" and "REC" will flash.
5
Press the / (TAPE 2 ) button.
"SYNC" will disappear and "REC" will light up.
CD playback will start approximately 5 seconds after the
tape starts.
To stop recording:
Press the (CD ) button.
The CD and tape will stop.
Note:
When the end of the tape is reached whilst recording, the
CD player will display the track number which was being
played at that time, and stop automatically. If you want to
restart recording from the beginning of the interrupted
track, turn over the tape, press the REC PAUSE ( ) but-
ton and then the / (TAPE 2 ) button. (If tracks have
been stored in memory using the APMS function, record-
ing will restart from the first track stored in memory.)
Recording from the built-in radio
1
Press the ON/STAND-BY button to turn the power
on.
2
Load a cassette into the TAPE 2 cassette compart-
ment.
3
Tune in to the desired station (pages 16 - 17).
4
Press the REC PAUSE ( ) button.
"REC" will flash.
5
Press the / (TAPE 2 ) button.
"REC" will appear.
To interrupt recording:
1 Press the REC PAUSE ( ) button.
"REC" will flash.
2 Press the / (TAPE 2 ) button.
"REC" will appear.
To stop recording:
Press the (TAPE ) button.
Note:
If a whistling noise is heard whilst recording from an AM
station, move the AM loop aerial to a position where
noise is no longer heard from the unit.
When recording important selections, be sure to make a
preliminary test to ensure that the desired material is be-
ing properly recorded.
The volume and sound quality can be adjusted with no
effect on the recorded signal (Variable Sound Monitor).
Metal and CrO tapes should not be used for recording
or dubbing.
TAPE
CD
TAPE 2
PUSH
EJECT
ON/
STAND-BY
CD
REC PAUSE
CD
ON/
STAND-BY
TAPE 2
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...