Loading ...
Loading ...
Loading ...
70
Driving
301_en_Chap05_conduite_ed01-2016
N appears in the instrument panel.
You must keep your foot on the brake
pedal while starting the engine.
The vehicle then moves off on its own
(refer to the section on the "Creep
function").
F Select automated mode (position A),
manual mode (position M) or reverse
(position R).
AUTO and 1, 1 or R appear in the
instrument panel.
F Release the parking brake.
F Progressively take your foot off the brake
pedal.
Moving off
F Select position N.
F Press the brake pedal fully.
F Start the engine.
Do not press the brake and clutch
pedals simultaneously. This can cause
rapid clutch wear.
The creep function may be temporarily
unavailable if the clutch temperature is
too high or the slope too steep.
Do not leave children unsupervised
inside the vehicle when the engine is
running.
F Accelerate away.
Creep function
This function allows the vehicle to be
manoeuvred more easily at low speeds (when
parking, in traffic jams...).
With the gear selector in position A, M or R,
the vehicle moves as soon as you take your
foot off the brake pedal, at low speed and
with the engine at idle.
If the engine does not start:
- If N is flashing in the instrument
panel, move the selector to
position A then to position N.
- If the message "Foot on the brake"
is displayed, press the brake pedal
firmly.
Loading ...
Loading ...
Loading ...