Loading ...
Loading ...
Loading ...
149
9
Practical information
301_en_Chap09_info-pratiques_ed01-2016
F Place the foot of the jack 2 on the ground
and ensure that it is directly below the
front A or rear B jacking point provided on
the underbody, whichever is closest to the
wheel to be changed.
F Extend the jack 2 until its head comes into contact with the jacking point A or B used; the
vehicle’s contact surface at A or B must engage with the central part of the head of the jack.
F Raise the vehicle until there is sufficient space between the wheel and the ground to admit the
spare (not punctured) wheel easily.
Ensure that the jack is stable. If the ground is slippery or loose, the jack might slip or drop - Risk
of injury!
Take care to position the jack only at one of the vehicle’s jacking points A or B under the vehicle,
ensuring that the contact surface of the vehicle’s jacking point is centred on the head of the jack.
Otherwise there is a risk of damage to the vehicle and/or that the jack might drop - Risk of injury!
Loading ...
Loading ...
Loading ...