Loading ...
Loading ...
Loading ...
49-80507-6
17
1. Slide the left corner into opening and push power
cord into the hole leading to the outlet location.
Thread the cord through as drawer is being
pushed back into the opening.
If the outlet is installed inside the opening, plug
the cord into the outlet. In this location, the
excess power cord should be coiled and taped to
the right side of the unit. Make sure the cord does
not get trapped by the drawer.
NOTE: Insure that the power cord does not
contact the hot surfaces on the bottom of ovens,
cooktops, or any other appliance.
2. Push the drawer back until the front flange is
flush to the cabinet front.
3. Open the drawer fully.
4. Drill pilot holes through the holes in the
overlapping frame, one on each corner.
5. Drive wood screws provided into each corner.
INSTALLING WARMING DRAWER
INSTALLATION INSTRUCTIONS
Installation Instructions
Loading ...
Loading ...
Loading ...