Loading ...
Loading ...
Loading ...
12
49-80507-6
MATERIALS YOU WILL NEED
Installation
Warming Drawer
Instructions
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
•
IMPORTANT ³ Save these instructions
for local inspector’s use.
•
IMPORTANT ³ Observe all governing
codes and ordinances.
•
Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Product failure due to improper installation is
not covered under the Warranty.
•
WARNING ³ This appliance must be
properly grounded.
•
WARNING ³ Insure that the power
cord does not contact the hot surfaces on
the bottom of ovens, cooktops, or any other
appliance.
•
ATTENTION INSTALLER ³
Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
PKD915, PTD915, CW9000, PJ7000 and PW9000
“If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com”
Wood screws and adhesive or other hardware for installing
runners or shelf to support warmer drawer.
Runners must be level, rigidly mounted and capable of
supporting 150 pounds.
2 x 4 or 2 x 2 lumber for runners and brace
INSTALLATION INSTRUCTIONS
TOOLS REQUIRED
Safety Glasses
Cut Resistant Gloves
Drill and
1/16” Bit
Measuring Tape
Phillips Screwdriver
Hand Saw
Level
Loading ...
Loading ...
Loading ...