Loading ...
Loading ...
Loading ...
49-80507-6
13
INSTALLATION INSTRUCTIONS
Installation Instructions
GROUNDING THE APPLIANCE
,03257$17³3OHDVHUHDGFDUHIXOO\
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE PROPERLY GROUNDED.
This warming drawer must be supplied with 120V,
60Hz, and connected to an individual, properly
grounded branch circuit, and protected by a 15
or 20 amp circuit breaker or time delay fuse.
•
A properly grounded 3-prong receptacle should
be located within reach of the drawer’s 56"
long power cord.
• Locate the receptacle in an adjacent cabinet.
³ within 42” of the right side or,
³ within 16” of the left side or
³ A recessed receptacle may be located on
the right side of the cutout, 7” maximum
from the back of the cabinet. In this location,
the excess power cord should be coiled and
taped to the right side of the unit.
,03257$17³3OHDVHUHDGFDUHIXOO\
The power cord of this appliance is equipped
with a 3-prong (grounding) plug that mates with
a standard 3-prong grounding wall receptacle
to minimize the possibility of electric shock. The
customer should have the wall receptacle and
circuit checked by a qualified electrician to make
sure the receptacle is properly grounded and has
the correct polarity.
•
Where a standard 2-prong wall receptacle is
encountered, it is the personal responsibility
and obligation of the customer to have it
replaced with a properly grounded 3-prong
wall receptacle.
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
DO NOT USE AN EXTENSION CORD OR
ADAPTER PLUG WITH THIS APPLIANCE.
FOLLOW NATIONAL ELECTRICAL CODES AND
ORDINANCES.
IMPORTANT SAFETY INSTRUCTIONS
Rating plate
Recessed
receptacle 7"
max. from rear
on right side
Drill 1
1
/2” hole for
power cord for
left or right side
outlet location
A
When preparing warming drawer cabinet,
make sure the inside of the cabinet and the
warming drawer do not interfere with each
other. (see sections on preparing cabinet)
B
REMOVE PACKAGING MATERIALS: Failure to
remove packaging materials could result in
damage to the appliance. Remove all packing
parts from warming drawer including lifting up
the warming drawer to confirm all packaging is
removed.
C
Remove Installation Instructions from literature
pack and read them carefully before you begin.
Be sure to place all literature, Owner’s Manual,
Installations, etc in a safe place for future
reference.
PRE-INSTALLATION CHECKLIST
Loading ...
Loading ...
Loading ...