Loading ...
Loading ...
Loading ...
Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
If the system still detects a leak in
the vehicle’s evaporative emissions
system, the malfunction indicator
lamp (MIL) comes on. If the fuel fill
cap was not already tightened, turn
the engine off, and check or
retighten the fuel fill cap until it
clicks at least once. The MIL should
go off after several days of normal
driving once the cap is tightened or
replaced. If the MIL does not go off,
have your vehicle inspected by a
dealer. For more information, see
page .
If the hood latch handle moves
stiffly, or if you can open the hood
without lifting the handle, the
mechanism should be cleaned and
lubricated.
Put your fingers under the front
edge of the hood near the center.
Slide your hand to the left until
you feel the hood latch handle.
Push this handle to the left to
release the hood. Lift up the hood.
1. 2.
403
CONTINUED
Opening and Closing the Hood
Service Station Procedures
Before Driving
287
LATCH
HOOD RELEASE HANDLE
Pull
０８／１２／２７ １２：０４：０１ ３１ＴＭ８６００ ０２９２
2010 Insight
Loading ...
Loading ...
Loading ...