Loading ...
Loading ...
Loading ...
EN 42
11. SETUPS
11.1. HDMI Video
Q (home) “Setup” “Player Settings” “HDMI” “Resolution”
Set the resolution of the video signal being output from
the HDMI OUT jack.
You can select the desired “HDMI Video” among the
settings listed below:
“Auto”, “480p”, “1080i”, “1080p”, “4K”
Actual Output Resolution:
Setting in the
“HDMI Video”
Source
720 x 480
(30i)
1280 x 720
(60p)
1920 x 1080
(30i)
1920 x 1080
(24p)
1920 x 1080
(60p)
3840 x 2160
(24p)
3840 x 2160
(60p)
480p
720x480
(60p)
720x480
(60p)
720x480
(60p)
720x480
(60p)
720x480
(60p)
720x480
(60p)
720x480
(60p)
1080i
1920x1080
(60i)
1920x1080
(60i)
1920x1080
(60i)
1920x1080
(24p)
1920x1080
(60i)
1920x1080
(24p)
1920x1080
(60i)
1080p
1920x1080
(60p)
1920x1080
(60p)
1920x1080
(60p)
1920x1080
(24p)
1920x1080
(60p)
1920x1080
(24p)
1920x1080
(60p)
4K
3840x2160
(60p)
3840x2160
(60p)
3840x2160
(60p)
3840x2160
(24p)
3840x2160
(60p)
3840x2160
(24p)
3840x2160
(60p)
Auto
The highest resolution supported by your display device will be
in effect automatically.
• The resolution listed in the above chart will be enabled
on this unit when the “4K/60p Output” is set to
“4K/60p(4:4:4)”, and the “24p Output” is set to “Auto”.
• For AVCHD, outputting the video in 24 frames per
second (1080p/24) is not available.
NoteD
• The selected resolution must also be supported by your
display device.
• Even if “HDMI Resolution” is set to “4K”, the video of
a non-4K compatible Blu-ray Disc™ will be output in
the video resolution that is specified by the Disc and
supported by the display device.
• Refer also to your TV’s manual.
• When connected to an HDCP incompatible display
device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including
the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some
do not support audio output (for example, projectors).
While connected to a device such as a projector, audio
will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a DVI-D
compatible display device(s) (HDCP compatible) with
an HDMI-DVI converter cable, the signals are output in
digital RGB.
• When playing back a Frame Sequential 3D Disc, video
resolution of output picture will depend on contents
on the disc. (“HDMI Video” setting is not applicable for
Frame Sequential 3D Discs.)
Copyright protection system
To play back the digital video images of a BD-video
or DVD-video via an HDMI connection, it is necessary
that both the player and the display device (or an AV
receiver / amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP.Please
read the operating instructions of your display device (or
an AV receiver / amplifier) for more information.
Note that 4K content viewing requires an HDCP 2.2
compatible TV and cables.
11.2. High Dynamic Range Output
Q (home) “Setup”
“Player
Settings”
“HDMI”
“Advanced
Settings”
“High Dynamic
Range Output”
This setting is only available during Ultra HD Blu-ray
playback.
“Auto”: outputs an HDR-enhanced video according to the
video and the connected devices' specifications.
Note that the display device must also be HDR-
compatible.
“Off”: Outputs a video in 2K quality.
NoteD
• If a video does not display correctly, select “Off”.
Loading ...
Loading ...
Loading ...