Loading ...
Loading ...
Loading ...
EN 19
5. BEFORE YOU START
5.1. Finding the Viewing Channel /Source
on Your TV
After you have completed all the connections, you must
find the viewing channel (external input source) on your TV.
1. After you have made all the necessary
connections, press [ B (standby/on)] to turn on the
unit.
2. Turn on your TV.
3. Press the button on the TV’s remote control that
accesses the external input channel. It may be
labeled “SOURCE”, “AV”, “AUX” or “SELECT” (refer
to your TV’s user manual). Or press “2” on the TV’s
remote control, then press channel down button.
Please wait.
This is the correct viewing channel (external input
source).
• If the TV is connected by an HDMI cable, it may take
a while for the Philips splash screen to come up.
• If a certain amount of time has passed since you
turned on the unit, welcome screen appears the first
time you turn on this unit.
5.2. Initial Setup
Please follow the instructions below to complete the initial
setup.
1. While “On-Screen Language” screen is displayed,
use [ K / L ] to select your language, then press
[OK].
English
Français
Español
On-screen Language
Select the On-Screen Language.
Sélectionnez la langue d'achage.
Seleccione un Idooma para el menú en pantalla que
desee desplegar.
• When this unit is connected to a 4K-compatible TV,
the “4K/60p Output” screen will appear. Otherwise,
move on to step 3.
2. Follow the on-screen instructions, and if the “Is this
message displayed?” screen is displayed, select
“Yes”, then press [OK].
• If a confirmation screen* appears, select “Yes”, then
press [OK].
* It takes some time until the confirmation screen
appears.
3. The “Quick start” screen will appear. Use [ K / L ] to
select “On” or “Off”, then press [OK].
“On”: In order to make the unit start faster, then set to
"On". If done then this will increase the Power
Consumption during Standby mode.
“Off”: “Off” will reduce the Power Consumption during
Standby mode rather than “On”.
4. Press [OK].
• “Easy Settings” is finished.
5. “Easy Network Setting” screen will appear. Use
[ K / L ] to select the desired mode, then press [OK].
• If you select “Wired”, refer to “Wired” on page 43
for further operation.
• If you select “Wireless”, refer to “Wireless” on page
45 for further operation.
6. The Home menu will appear.
Loading ...
Loading ...
Loading ...