Loading ...
Loading ...
Loading ...
94
uuIndicatorsu
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
All-wheel drive
(AWD)
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Comes on if there is a problem
with the AWD system.
●
Blinks when the differential
temperature is too high.
●
Stays on constantly - The engine drives
the front wheels only in this state. Have
your vehicle checked by a dealer.
—
●
Blinks while driving - Stop in a safe
place, change to
(P, and idle the engine
until the indicator goes off. If the indicator
does not stop blinking, take your vehicle
to a dealer.
2 Real Time AWD with Intelligent
Control System
TM
*
P. 515
—
Road Departure
Mitigation
(RDM) Indicator
*
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on if there is a problem
with the RDM system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on if the RDM is
deactivated temporarily after the
battery has been disconnected,
then re-connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 94 ページ ２０１８年８月２２日 水曜日 午後２時５９分
Loading ...
Loading ...
Loading ...