Loading ...
Loading ...
Loading ...
89
uuIndicatorsu
Continued
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
System Message
Indicator
*
●
Comes on along with a beep
when a problem is detected. A
system message on the driver
information interface appears at
the same time.
●
While the indicator is on, press the
(display/information) button to see the
message again.
●
Refer to the Indicators information in this
chapter when a system message appears
on the driver information interface. Take
the appropriate action for the message.
●
The driver information interface does not
return to the normal screen unless the
warning is canceled, or the button
is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●
Blink when you operate the turn
signal lever.
●
Blinks along with all turn signals
when you press the hazard
warning button.
●
Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 588
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
— —
Auto High-beam
System Indicator
*
●
Comes on when all the operating
conditions of the Auto high-beam
system are met.
2 Auto High-Beam System
*
P. 179
—
Lights On
Indicator
●
Comes on when the light switch
in a position other than OFF or
when the switch is set to AUTO
*
and the exterior lights come on.
●
If you remove the key from the ignition
switch
*1
while the exterior lights are on, a
chime sounds when the driver's door is
opened.
—
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 89 ページ 2018年8月22日 水曜日 午後2時59分
Loading ...
Loading ...
Loading ...