Loading ...
Loading ...
Loading ...
186
uuOperating the Switches Around the Steering WheeluBrightness Control
Controls
Brightness Control
With the parking lights are turned on and the
ignition switch is in ON (w
*1
, you can use the
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beeper when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous screen.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
1Brightness Control
Instrument panel brightness differs between when
the exterior lights are on and when they are off. The
instrument panel dims to reduce glare when the
lights are on.
When it is bright outside and the headlight
integration with the wiper is activated, the
instrument panel brightness does not change.
Turn the knob to the right until the brightness display
is up to max. This cancels the reduced instrument
panel brightness when the exterior lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
To cancel the reduced instrument panel brightness
when the exterior lights are on, turn the knob to the
right until the brightness display is up to max, the
beeper sounds.
Models with headlight integration with wipers
Control Knob
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 186 ページ ２０１８年８月２２日 水曜日 午後２時５９分
Loading ...
Loading ...
Loading ...