Loading ...
Loading ...
Loading ...
629
uuJump Startingu
Handling the Unexpected
Once your vehicle's engine has started, remove the jumper cables in the following
order:
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
What to Do After the Engine Starts
1What to Do After the Engine Starts
The indicators for the Adaptive Cruise Control (ACC)
with Low Speed Follow (LSF)
*
, Road Departure
Mitigation (RDM)
*
, Vehicle Stability Assist® (VSA®)
system, Vehicle Stability Assist® (VSA®) OFF, Collision
Mitigation Braking System
TM
(CMBS
TM
)
*
, low tire
pressure/TPMS, and Parking Brake and Brake System
(Amber) may come on along with a message in the
Driver Information Interface
*
when you turn the
ignition switch to ON
(w
*1
after reconnecting the
battery.
Drive a short distance at more than 12 mph (20 km/
h). The indicator should go off. If it does not, have
your vehicle checked by a dealer.
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 629 ページ ２０１８年８月２２日 水曜日 午後２時５９分
Loading ...
Loading ...
Loading ...