Loading ...
Loading ...
Loading ...
585
uuReplacing Light BulbsuHeadlight Bulbs
Maintenance
1. Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to
remove.
4. Insert a new bulb into the headlight
assembly and turn it clockwise.
5. Insert the coupler into the connector of the
bulb.
■
Low Beam Headlights
1Low Beam Headlights
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Holding clip
Center pin
Push until the
pin is flat.
Holding clip
Passenger side
Coupler
Bulb
Tab
Both side
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 585 ページ ２０１８年８月２２日 水曜日 午後２時５９分
Loading ...
Loading ...
Loading ...