Loading ...
Loading ...
Loading ...
Chapter 5
44
f When you have finished, press
Stop/Exit.
Setting your changes as a
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them the default setting.
These settings will stay until you change
them again.
a Press (Fax).
b Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring all the settings to
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (Fax).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a Press (Fax).
b Load your document.
c To listen for a dial tone do one of the
following:
(MFC-440CN) Press Hook or pick up
the handset of an external phone.
(MFC-665CW) Press
Speaker Phone or pick up the
handset.
(MFC-845CW) Press
Speaker Phone on the machine.
d Dial using the machine’s dial pad.
e When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
f If you picked up the machine’s handset,
or an external handset replace it.
Sending a fax at the end of a
conversation (MFC-440CN
and MFC-665CW only) 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
d Replace the handset.
Loading ...
Loading ...
Loading ...