Loading ...
Loading ...
Loading ...
34
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
—
5
Place a different presser foot below the holder
so that the presser foot pin is aligned with the
notch in the holder.
Position the presser foot so the letter indicating
the presser foot type (A, G, I, J, M, N or R) is
positioned to be read.
1 Presser foot holder
2 Notch
3 Pin
4 Presser foot type
6
Slowly lower the presser foot lever so that the
presser foot pin snaps into the notch in the
presser foot holder.
1 Presser foot lever
2 Presser foot holder
3 Notch
4 Pin
X The presser foot is attached.
7
Raise the presser foot lever to check that the
presser foot is securely attached.
Note
● For details on the presser foot that should be
used with the selected stitch, refer to “Stitch
Settings” (page 94).
Adjusting the pressure of
the presser foot
The presser foot pressure (the amount of pressure
applied to the fabric by the presser foot) can be
adjusted.
1
Lower the presser foot lever.
1 Presser foot lever
2
Turn the presser foot pressure dial at the back
of the machine to adjust the pressure of the
presser foot.
The scale on the dial indicates the range from
1 (weak) to 4 (strong). Turn the dial to the right
(smaller number) to decrease the pressure.
Turn the dial to the left (larger number) to
increase the pressure.
1 Strong
2 Weak
3
When you are finished sewing, reset the dial
to 3 (standard).
1
2
3
4
J
1
2
3
4
1
ab
Loading ...
Loading ...
Loading ...