Loading ...
Loading ...
Loading ...
114
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
The sewing lamp
does not come
on.
The sewing lamp is damaged.
Contact your dealer or the nearest
authorized service center.
–
While winding
the bobbin, the
bobbin thread
was wound
below the bobbin
winder seat.
You have not wound the bobbin
thread properly.
After removing the thread wound
below the bobbin winder seat, wind
the bobbin correctly.
page 109
Bobbin thread
does not wind
neatly on the
bobbin.
The thread is not passed through the
bobbin-winding thread guide
correctly.
Correctly pass the thread through the
bobbin-winding thread guide.
page 18
Bobbin spins slowly.
Move the sewing speed controller to
the right (so that the speed will be
fast).
page 19
The thread that was pulled out was
not wound onto the bobbin
correctly.
Wind the thread that was pulled off
round the bobbin five or six times
clockwise.
page 19
Fabric being
sewn with the
machine cannot
be removed.
Thread is tangled below the needle
plate.
Lift up the fabric and cut the threads
below it, and clean the race.
page 106
The fabric feeds
in the opposite
direction.
The feed mechanism is damaged.
Contact your dealer or the nearest
authorized service center.
–
The upper
thread has
tightened up.
The bobbin thread is incorrectly
installed.
Correctly install the bobbin thread.
page
20, 102
The thread is
tangled on the
wrong side of
the fabric.
You have not threaded the upper
thread properly.
Correct the upper threading.
page
22, 103
Symptom Probable Cause Remedy Reference
Loading ...
Loading ...
Loading ...