Loading ...
Loading ...
Loading ...
46 English
Maintaining your appliance
Maintaining your appliance
Removing and replacing the warming drawer
CAUTION
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Pull out the drawer until it stops.
2. Locate the locking clips near the back of each full-extension roller guide rail.
Using two hands, push down on the left clip and lift up on the right clip to
release the clips. Pull the drawer the rest of the way out.
Lever
Lever
Push down on the
left guide
Pull up on the right
guide
3. Pull the warming drawer away from the range.
How to replace the warming drawer
Right roller guide rail
1. Position the ends of the full-extension
roller guide rails in the side rails of the
drawer opening.
2. Push in the drawer to close it and snap
the locking clips into place.
How to replace the door
You can replace the upper door the same way you replace the full door
(NE59*785***).
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Bottom
edge of
slot
Indentation
Hinge
arm
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Hinge lock
Locked positionUnlocked position
5. Close the oven door.
Loading ...
Loading ...
Loading ...