Loading ...
Loading ...
Loading ...
227Fuses and bulbs
– Installation involves all of the above steps in reverse sequence.
– Check that the bulb works properly.
Changing bulbs for rear lights (in side panel)
Removing tail light
Fig. 162 Remove rear
light unit from side panel
Check which of the bulbs is defective.
– Open the luggage compartment to access the rainduct area.
– Take the screwdriver or a Torx 20 key (T20) from the vehicle tool
kit and loosen (turning anti-clockwise) and remove the two re-
taining screws that secure the front of the light ⇒ Fig. 162
1
,
taking care not to lose them.
– Pull the rear light unit backwards (⇒ Fig. 162
2
) to remove the
light from its housing.
Remove the bulb holder
Fig. 163 Light connector
at the rear of the rear
light unit
Fig. 164 Retaining
screws on reverse side of
rear light unit
– Disconnect the light connector
A
⇒ Fig. 163 by moving its side
levers (arrows) and pulling the connector outwards.
– Place the light on a level, horizontal surface on top of a soft
cloth so as not to scratch the outer glass.
– Unscrew the four retaining screws from the bulb holder anti-
clockwise using a screwdriver or a Torx 20 key (T20) from the ve-
hicle tool kit
⇒
Fig. 164. Take care not to lose the bulb holder
retaining screws.
Safety First Operating instructions Practical Tips Technical specifications
Loading ...
Loading ...
Loading ...