Loading ...
Loading ...
Loading ...
132 Heating and air conditioning
WARNING
Never use the air recirculation system for too long, as it prevents fresh air
from entering the vehicle and “used” air can cause tiredness, reduce your
attention span and cause the windows to mist over. This increases the
risk of an accident. Switch off the air recirculation system as soon as the
windows begin to mist over.
Air conditioning (manual)*
General notes
The air cooling system only works if the
AC
button
2
⇒ Fig. 98
⇒ page 132 is pressed and under following conditions:
● The engine is running
● the outside temperature is above +2 °C (+36 °F)
● The blower control is in position 1 – 4
When the cooling system is on and under certain conditions, air can be
blown from the vents at a temperature of approx. +5 °C (+41 °F). In the
event of prolonged, irregular distribution of the air flow from the outlets and
significant differences in temperature, e.g. on leaving the vehicle, sensitive
people may catch a cold.
Note
A visit to the specialised service once a year is recommended to clean the
air conditioning system.
Operation
Fig. 98 Air conditioning: controls
Temperature selection
– Turn rotary control
A
⇒ Fig. 98 clockwise to increase the tem-
perature.
– Turn rotary control
A
anti-clockwise to reduce the temperature.
Blower selection
– Turn rotary control
B
⇒ Fig. 98 to position 1 to 4 to switch the
blower on.
– Turn rotary control
B
to position 0 to switch the blower off.
– Press button
1
⇒ page 134, Air recirculation to close the
fresh air vent.
Air distribution selection
– Turn rotary control
C
⇒ Fig. 98 to select the air vents
⇒ page 129 you wish to activate.
Loading ...
Loading ...
Loading ...