Loading ...
Loading ...
Loading ...
107Lights and visibility
Interval wipe
– Move the lever up to the stop
1
⇒ Fig. 65.
– Set the required interval wipe using the control
A
.
Slow wipe
– Move the lever up to the stop
2
⇒ Fig. 65.
Continuous wipe
– Move the lever up to the stop
3
⇒ Fig. 65.
Automatic wash and wipe
– Pull the lever towards the steering wheel, position
5
⇒ Fig. 65,
and the windscreen washer and wipers are switched on.
– Release the lever. The washer will stop and the windscreen wip-
ers will keep running for 1–3 wipes (depending on the wind-
screen washer operating time).
Rear window wiper *
– Press the lever forwards to the stop
6
⇒ Fig. 65 and the rear
window wiper will run every 6 seconds.
Automatic rear window wash wipe*
– Press the lever forwards fully to position
7
⇒ Fig. 65 and the
rear window wiper and washer are switched on at the same
time.
– Release the lever. The rear window washer will stop and the rear
window wipers will keep running for 1–3 wipes (depending on
the jet operating time). When released, the lever remains in po-
sition
6
.
Switching off the wipers
– Move the lever to position
0
⇒ Fig. 65.
Headlight washer system*
The headlight washers operate briefly if the dipped or main beam is on and
the lever is raised to position
5
⇒ Fig. 65. The headlight washer system al-
so operates every ten windscreen wash cycles.
Clean off stubborn dirt (insects, etc.) from the headlights at regular inter-
vals, for instance when filling the fuel tank. Please observe the following in-
dications ⇒ page 175, Headlights.
To ensure the system works properly in winter, keep the nozzle holders free
of snow and remove any ice with a de-icer spray.
CAUTION
Never pull on the nozzle holders. Risk of damage to the system!
Changing the windscreen wiper blades
Fig. 66 Windscreen wip-
er blades
Safety First Operating instructions Practical Tips Technical specifications
Loading ...
Loading ...
Loading ...