Loading ...
Loading ...
Loading ...
134 Heating and air conditioning
Air conditioning selection
Basic air conditioning control settings recommended for the corresponding
operating modes:
Settings
Control position Button
Air vents 4
A B C 1 2
Windscreen and side window
defrost
a)
Required temper-
ature
3 or 4
Do not switch on
Switched on automat-
ically
b)
Open and direct towards
the side window
Heat as quickly as possible
Clockwise as far
as it will go
3
Switch on briefly Off Opening
Mild heating
Required temper-
ature
2 or 3
Do not switch on Off Opening
Heat as quickly as possible
Anti-clockwise as
far as it will go
Briefly 4, then 2
or 3
Switch on briefly
c)
Ignition Opening
Optimum cooling
Required temper-
ature
1 or 2, respec-
tively. 3
Do not switch on Ignition
Open and direct towards
the roof
Fresh air mode - blower
Anti-clockwise as
far as it will go
Required posi-
tion
Do not switch on Off Opening
a)
This type of setting is not recommended in countries with high air humidity. The windows could cool too quickly and cause them to mist over on the outside.
b)
The lamp in button
2
lights up, even if not all of the conditions for cooling system operations are met. Cooling is indicated as available once all of the conditions are met ⇒ page 132, General
notes.
c)
In certain conditions, air recirculation mode can switch on automatically ⇒ page 134, a lamp lights up in the
button.
Note
● Controls
A
⇒ Fig. 98 ⇒ page 132,
B
,
C
and buttons
1
and
2
.
● Air vents 4 ⇒ page 129.
● We recommend you leave the air vents 3 ⇒ page 129 in the open posi-
tion.
Air recirculation
Air recirculation prevents unpleasant smells, e.g. when passing
through a tunnel or in queuing traffic, from entering the interior.
Switching on air recirculation mode
– Press button
1
⇒ Fig. 98 ⇒ page 132 and the lamp in the
button will light up.
Loading ...
Loading ...
Loading ...