Loading ...
Loading ...
Loading ...
Failed bulb or lamp
150
boxer_en_Chap08_Aide-Rapide_ed01-2015
1 - Main beam headlamps
Type D, H7 - 55 W
- Remove the cover by pulling on the
rubber tongue.
- Disconnect the electrical connector.
- Release the retaining spring by pressing
on the central clip.
- Change the bulb taking care to align the
metal part with the groove on the lamp.
2 - Dipped beam headlamps
Type D, H7 - 55 W
- Remove the cover by pulling on the
rubber tongue.
- Disconnect the electrical connector.
- Release the retaining spring by pressing
on the central clip.
- Change the bulb taking care to align the
metal part with the grooves on the lamp.
Front lamps
3 - Direction indicators
Type A, WY 21 W - 21 W
- Remove the cover by pulling on the
rubber tongue.
- Turn the bulb holder a quarter turn
anticlockwise.
- Change the bulb.
Open and secure the bonnet with the stay.
To access the bulbs, reach behind the
headlamp unit.
If necessary you can remove the headlamp:
- Depending on the country of sale,
remove the very low temperature
protection padding by sliding it towards
the outside of the vehicle.
- Disconnect the electrical connector by
removing its locking ring.
- Remove the two headlamp fixing
screws.
- Move the headlamp towards the centre
of the vehicle to extract it from its
sliders.
On the left hand side, take care not to
dislodge the bonnet stay.
Loading ...
Loading ...
Loading ...