Loading ...
Loading ...
Loading ...
NEW OPERATOR DRIVING PROCEDURES
1. Wear protective riding gear. See the Safe Riding Gear section.
2. Perform the pre-ride inspection.
3. Place the transmission in PARK.
4. Lock the parking brake.
5. Mount the vehicle from the left side.
6. Sit upright with both feet on the footrests and both hands on the handlebars.
7. Start the engine and allow it to warm up.
8. Shift the transmission into gear.
9. Check your surroundings and determine your path of travel.
10. Release the parking brake.
11. Slowly depress the throttle with your right thumb and begin driving.
12. Drive slowly. Practice maneuvering and using the throttle and brakes on level
surfaces.
DRIVING WITH A PASSENGER
1. Never carry more than one passenger on a 2-up ATV.
2. Do not carry a passenger on a 2-up ATV until you have at least two hours of
driving experience with the vehicle.
3. Never allow anyone under 12 years of age to ride as a passenger on a 2-up
ATV. Make sure any passenger is tall enough to comfortably and safely
reach the grab handles and footrests.
4. Make sure the passenger is wearing appropriate riding gear, including an
approved helmet with a rigid chin guard.
5. Perform the pre-ride inspection.
6. Lock the parking brake.
7. Mount the vehicle from the left side. After the operator is seated, the
passenger should mount the vehicle from the left side. Always make sure the
brake is engaged to ensure the vehicle remains motionless whenever a
passenger mounts or dismounts.
8. A passenger should always be seated in the passenger seat with both feet
on the footrests and both hands on the passenger grab handles at all times.
The passenger should never hold on to the operator. Never secure a
passenger to the vehicle or to the operator with a belt, rope or similar device.
83
OPERATION
Loading ...
Loading ...
Loading ...