Loading ...
Loading ...
Loading ...
BATTERY REMOVAL
NOTICE
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the vehicle.
1. Disconnect the battery hold-down strap.
2. Remove the battery cover (if equipped).
3. On conventional batteries, remove the battery vent tube.
4. Disconnect the black (negative) battery cable first.
5. Disconnect the red (positive) battery cable last.
6. Lift the battery out of the ATV. Be careful not to tip a conventional battery
sideways, which could spill electrolyte.
BATTERY STORAGE
Whenever the vehicle is not used for a period of three months or more, remove
the battery from the vehicle, ensure that it's fully charged, and store it out of the
sun in a cool, dry place. Check battery voltage each month during storage and
recharge as needed to maintain a full charge.
POLARIS recommends maintaining
battery charge by using a POLARIS
Battery Tender charger or by charging
once a month using the battery tender
port
q
. Battery Tender can be left
connected during the storage period,
and will automatically charge the battery
if the voltage drops below a pre-
determined point. See the Polaris
Products section for the part numbers.
152
MAINTENANCE
Loading ...
Loading ...
Loading ...