Loading ...
Loading ...
Loading ...
ALL WHEEL DRIVE SYSTEM
The All Wheel Drive system is
controlled by the AWD momentary
switch
q
. Engage AWD before getting
into conditions where front wheel drive
may be needed. If the rear wheels are
spinning, release the throttle before
switching to AWD.
NOTICE
Switching to AWD or 4WDC AWD (if equipped) while the rear wheels are
spinning may cause severe drive shaft and gearcase damage. Always switch
to AWD or 4WDC AWD (if equipped) while the rear wheels have traction or are
at rest.
AWD MODE
Move the momentary switch to the far
right to engage AWD. AWD will engage
when engine speed slows to below
3100 RPM. The gauge will display
“AWD”. There is no limit to the length of
time the vehicle may remain in AWD.
The vehicle automatically engages
AWD when operating in reverse if the
switch is set to the AWD position.
Once enabled, AWD remains enabled until the switch is turned off. If the switch
is turned off while the demand drive unit is moving, it will not disengage until the
rear wheels regain traction.
When in AWD, the demand drive unit will automatically engage any time the rear
wheels lose traction. When the rear wheels regain traction, the demand drive
unit will automatically disengage.
2X4 MODE
Move the momentary switch to the far
left to operate in two-wheel drive. AWD
will disengage when engine speed
slows to below 3100 RPM. The gauge
will display “2X4”.
55
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...