Loading ...
Loading ...
Loading ...
DRIVELINE MODE SWITCH (IF EQUIPPED)
The driveline mode switch
q
controls
the All Wheel Drive (AWD) system. Use
this switch to change the driveline
modes between Turf Mode, 2WD, AWD,
and ADC. The vehicle automatically
engages AWD when operating in
reverse if the driveline mode is set to
AWD.
WINCH SWITCH
See the Winch Guide chapter of your owner’s manual for winch information.
HAZARD WARNING SWITCH
Push the hazard warning switch to cause all turn signal lights to flash
simultaneously. Use this feature to alert others of an emergency or other
situation requiring caution.
HORN SWITCH
Press the horn switch to sound the horn.
VARIABLE LOW SPEED SWITCH (IF EQUIPPED)
The variable low speed switch (if equipped) allows you to
limit the speed of your ATV. The speed limiter can be set
at any speed between 11–22 km/h.
To activate the variable low speed feature, the following
conditions must all be met:
• The Engine must be running
• You must be in Low gear
• The Variable Low Speed switch must be in the on
position
When all 3 of the above conditions are met, the gauge will
read: LIMIT ON. Use the up and down arrows to set the
desires maximum speed (between 11–22 km/h).
43
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...