Loading ...
Loading ...
Loading ...
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM SUGGESTED
LUBRICANT
CAPACITY AT
FLUID
CHANGE
FILL PLUG
TORQUE
DRAIN PLUG
TORQUE
REF.
Engine Oil
PS-4 5W-50 4-
Cycle Oil
1.9 l
(2 qt.)
–
19-23 Nm
(14-17 ft-lbs)
page
119
Brake Fluid
DOT 4 Brake
Fluid
– – –
page
128
Transmis-
sion Oil
AGL Gearcase
Lubricant &
Transmission
Fluid
946 ml
(32 oz.)
27-34 Nm
(20-25 ft-lbs)
27-34 Nm
(20-25 ft-lbs)
page
123
Demand
Drive Fluid
(Front
Gearcase)
Demand Drive
Fluid
275 ml
(9.3 oz.)
11–14 Nm
(8–10 ft-lbs)
15 Nm
(11 ft-lbs)
page
124
Rear
Gearcase
Oil
ATV Angle
Drive Fluid (or
GL5 80–90
weight gear
lube)
210 ml
(7.1 oz.)
14–19 Nm
(10–14 ft-lbs)
14–19 Nm
(10–14 ft-lbs)
page
124
Front Prop
Shaft Yoke
U-Joint Grease
Grease fitting (3 pumps maximum) every 800 km (500 miles),
before long periods of storage, or after pressure washing or
submerging.
118
MAINTENANCE
Loading ...
Loading ...
Loading ...