Loading ...
Loading ...
Loading ...
TURF MODE (IF EQUIPPED)
When operating in TURF mode, the inside rear wheel will rotate independently
from the outside wheel during turns. Operate in TURF mode only as needed to
protect smooth, level surfaces from tire damage. DO NOT operate in TURF
mode when climbing or descending hills, when sidehilling, or when operating on
uneven, loose, or slippery terrain such as sand, gravel, ice, snow, obstacles, and
water crossings. Always operate in ADC 4X4 or 4X4 on these types of terrain.
WARNING
Operating in TURF mode when on sloped, uneven, or loose terrain could
cause loss of control and result in serious injury or death. One rear wheel may
slip and lose traction or may lift up and grab when it touches the ground again.
ADC MODE (IF EQUIPPED)
The ADC system allows engine braking
to all four wheels when the vehicle
descends a hill or incline. Always
engage ADC mode (if equipped) before
ascending or descending a hill.
ENGAGING FOUR-WHEEL DESCENT CONTROL
The 4WDC system will automatically engage when all four of the following
conditions occur:
• The 4X4 switch must be in the 4WDC position
• The throttle must be closed (throttle lever released)
• The transmission must be in gear (high, low or reverse)
DISENGAGING FOUR-WHEEL DESCENT CONTROL
The 4WDC system will automatically disengage if at least one of the following
conditions occur:
• The 4X4 switch is moved out of the 4WDC position
• The throttle is open (throttle is applied)
• The transmission is shifted to neutral or park
• The vehicle is on flat ground, or not actively descending a hill
56
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...