Loading ...
Loading ...
Loading ...
26
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container (A4)
to contain water.
• If the water tank has not been lled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been completely
eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray;
• The appliance may request descaling cycles at very short in-
tervals. This is normal and due to the appliance’s advanced
control system.
SETTING WATER HARDNESS
The DESCALING NEEDED - PRESS OK TO START (~45min)
message is displayed after a period of time established
according to water hardness.
The machine is set by default for a hardness level of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
Measuring water hardness
1. Remove the "total hardness test" indicator paper (C1) from
its pack (attached to the instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending on
the hardness of the water. Each square corresponds to one
level.
soft water - level 1
slightly hard water - level 2
hard water - level 3
Very hard water - level 4
Setting water hardness
1. Press (B2) to enter the menu;
2. Press
(B10) or (B8) until WATER HARDNESS
appears on the display (B);
3. To change the level selected, press the symbol itself until
the required level is displayed (Level 1 = soft water; Level 4
= very hard water);
Press
= very hard water);
to go back to the homepage.
The machine is now reprogrammed with the new water hard-
ness setting.
TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10 A
Absorbed power: 1350 W
Pressure: 15 bar
Water tank capacity: 2.5 litres
Size:LxHxD: 597x450x470 mm
Net weight: 20 kg
Loading ...
Loading ...
Loading ...