Loading ...
Loading ...
Loading ...
23
EN
5. Wash all parts with warm water.
6. Insert the connection nozzle, then the cappuccino maker
on the spout by pushing it upwards and turning it clockwise
until it is attached.
CUSTOMISING THE BEVERAGES
The aroma (when required) and quantity of the drinks can be
customised.
1. Make sure the pro le for which you want to customise the
beverage is active. You can select "MY" beverages for each
of the 6 pro les;
2. From the homepage, press
(B1);
3. To access the customising screen, choose the beverage you
want to customise. The corresponding accessories must be
inserted;
4. (Beverages with co ee only) CHOOSE COFFEE AROMA : Se-
lect the required aroma by pressing or and press
;
5. CUSTOMISING COFFEE QUANTITY (OR WATER) STOP TO
SAVE : Preparation begins and the appliance displays the
quantity customising screen in the form of a vertical bar.
The star alongside the bar represents the current quantity.
6. When the amount reaches the minimum quantity you can
set, is displayed.
7. When the required quantity in the cup is reached, press
.
8. SAVE NEW SETTINGS? : Press YES or NO .
The appliance con rms if the values have been saved or not (de-
pending on the previous selection). Press .
The appliance goes back to the homepage.
• Cappuccino and milk-based co ees: the co ee aroma is saved
rst, followed by the quantity of rst milk, then co ee;
• HOT WATER: the appliance delivers hot water. Press
to save the required quantity.
• Press
to save the required quantity.
to exit programming. The values will not be
saved.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 40 ml 20-80 ml
LONG 160 ml 115-250 ml
COFFEE 180 ml 100-240 ml
DOPPIO+ 120 ml 80-180 ml
HOT WATER 250 ml 20-420 ml
MEMORISING YOUR PERSONAL PROFILE
The appliance allows you to memorise 6 di erent pro les, each
associated with a di erent icon.
The customised MY beverages AROMA and QUANTITY values are
saved in each pro le (see section “Customising the beverages
”). The order in which all the beverages are displayed is
based on the frequency of selection.
To select or enter a pro le, press on the pro le currently in use
(B11), press
(B10) or
(B8)
until the required pro le is
displayed, then press on the pro le.
• GUEST pro le: select this pro le to deliver beverages
with the default settings. The
function is not active.
CLEANING
Cleaning the machine
The following parts of the machine must be cleaned regularly:
• the appliance’s internal circuit;
• co ee grounds container (A4);
• drip tray (A14);
• water tank (A12);
• co ee spouts (A13);
• pre-ground co ee funnel (A21);
• infuser (A5), accessible after opening the infuser door (A2);
• milk container (D);
• hot water/steam connection nozzle (A10);
• control panel (B).
• Do not use solvents, abrasive detergents or alcohol to clean
the co ee machine. You need not use chemical products to
clean the machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D).
• Do not use metal objects to remove encrustations or co ee
deposits as they could scratch metal or plastic surfaces.
Cleaning the machine's internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
1. performing 2-3 rinse cycles by selecting the "Rinse" func-
tion (section “Rinsing ”);
2. delivering hot water for a few seconds (section “Delivering
hot water”).
After cleaning, it is normal for the grounds container (A4) to
contain water.
Cleaning the co ee grounds container
When EMPTY GROUNDS CONTAINER appears on the display (B),
( g. 26) the grounds container must be emptied and cleaned. The
Loading ...
Loading ...
Loading ...