Loading ...
Loading ...
Loading ...
49
MAINTENANCE
ENGLISH
Cleaning the Filters
1
Remove the lower rack and position the
bottom spray arm so a wider vee is open to
the front.
2
Turn the inner filter counter-clockwise and take
out the assembled inner filter and stainless
steel filter.
• With the filters removed, check the sump
opening and remove any foreign materials, if
needed.
3
Clean the filters with a soft brush under
running water. Reassemble the filters before
reinstalling them.
4
To replace the assembled filters, position
the spray arm so the wider vee is toward the
front. Fit the filters back into the filter holder
and secure them by turning the inner filter
clockwise until it clicks into place.
WARNING
• Be cautious of sharp edges when handling
the stainless steel filter.
CAUTION
• Remove food residue caught in filters to
prevent the build up of odor-causing bacteria
and possible drainage problems.
NOTE
• For best wash performance, clean the filter after
each load. If food debris remains in the filter, it
may cause an odor.
• In areas with hard water, clean the filter at least
once a month with a soft brush.
• Clean the filters using non-abrasive materials
and warm running water.
• Make sure the filter is assembled correctly
before starting a cycle. When assembling, rotate
it firmly until it clicks.
Recommended Filter Cleaning Schedule
Number of Loads
Per Week
If you wash
dishes before
loading
If you scrape
and rinse dishes
before loading
If you only scrape
dishes before
loading
If you do not
scrape or rinse
dishes before
loading
1-3 Every 6 months Once a year Four times a year Once a month
4-7 Every 6 months Once a year Four times a year
Twice a month
(every 15 days)
8-12 Every 6 months Every 6 months Every 1.5 months Every week
13-14 Every 6 months Every 6 months Every 1.5 months Twice a week
Loading ...
Loading ...
Loading ...