Loading ...
Loading ...
Loading ...
32
OPERATION
Options
Select the desired cycle button and then select the
options for that cycle.
Dual Zone
This option automatically sets the spray intensity
to soft for the upper spray arm and strong for
the lower spray arm. Place heavily soiled dishes
like plates and bowls in the lower rack and lightly
soiled dishes like cups and small plates in the
upper rack to get the best results.
Half Load
This option washes intensively by selecting the
upper or lower racks. For small loads, use just the
upper or lower rack to save energy and time. By
pressing the Half Load button, the settings f, g
and the cancellation of the Half Load option are
available.
Energy Saver
This option saves energy by reducing the wash
and rinse temperatures. Wash time is increased to
maintain wash performance. Do not use this cycle
with heavily soiled dishes.
Steam
This option adds steam at the start of the cycle to
improve wash performance. If the Steam option
is added to a cycle, the indicator ( )
stays lit at the end of the cycle if the dishes were
properly sanitized. If the dishwasher could not
properly sanitize the dishes because the Steam
option was not selected, the cycle was interrupted
or the water could not be heated to the required
temperature, the indicator will not light up at the
end of the cycle. Open and close the door or press
Power to turn the indicator off.
NOTE: This high temperature rinse sanitizes
dishes and glassware in accordance with the NSF/
ANSI Standard 184 for residential dishwashers.
Certified residential dishwashers are not intended
for use in licensed food establishments. Only
sanitizing cycles have been designed to meet
the requirements for soil removal and sanitization
efficacy. There is no intention, either directly or
indirectly, that all cycles on a certified machine
have passed the sanitization performance test.
High Temp
Raises the main wash temperature to improve
cleaning.
Extra Dry
Select the Extra Dry option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.
• When the rinse aid is empty, the Extra Dry
option is selected automatically.
Night Dry
Dishes are often left in the dishwasher overnight
after the cycle ends. This can result in the steam
inside the tub condensing on dishes, leaving them
wet. The Night Dry option runs the ventilation fan
periodically to help vent the steam from the tub.
• Press and hold Extra Dry for three seconds to
activate.
• The Night Dry option is selected by default for
all cycles for which it is available, except the
Normal cycle.
• To add the Night Dry option to the Normal
cycle, press and hold Extra Dry for 3 seconds.
Delay Start
The Delay Start feature delays the start of a
selected cycle. Each time the Delay Start button is
pressed, the delay time increases by an hour. The
delay time can be set from 1 to 12 hours, in one-
hour increments.
Loading ...
Loading ...
Loading ...