Loading ...
Loading ...
Loading ...
9. Unscrew the locking plate and take
out the compact spare tire and the air
compressor.
10. Remove the damaged wheel by using
the wheel wrench to loosen the bolts by
about one turn.
11. Position the jack under the vehicle,
near the wheel to be changed, taking care
not to damage the plastic body panel.
12. Lift the extension lever on the
wrench.
13. Rotate the extension lever
clockwise until the round pin on the jack
engages in the hole in the lifting block
located about six inches (15 cm) from the
outside edge of the body. The lifting
points are marked by triangles
visible
on the plastic body panel.
Caution!
Do not attempt to raise the vehicle by
jacking on locations other than those
indicated in the Jacking Instructions for this
vehicle.
14. Raise the vehicle by turning the jack
screw clockwise, using the swivel wrench.
Raise the vehicle only until the tire just
clears the surface and enough clearance
is obtained to install the compact spare
tire. Minimum tire lift provides maximum
stability.
08066V0010EM
Compact Spare Tire — If Equipped
1 — Locking Plate
08066V0013EM
Jacking Location
2 — Extension Lever
3 — Wrench Head
4 — Jack
5 — Lifting Block
09056V0001EM
Jacking Point Indicators
201
Loading ...
Loading ...
Loading ...