Loading ...
Loading ...
Loading ...
Driving your vehicle
826
Blind spot detection /
Lane change assist
Operating conditions
The indicator on the switch will illumi-
nate when the Blind spot detection
system switch is pressed with the
ignition switch ON. If the vehicle
speed exceeds 30 km/h (18.6 mph),
the system will activate.
If you press the switch again, the
switch indicator and system will be
turned off.
If the ignition switch is turned OFF
and ON the system returns to the
previous state.
When the system is not used turn the
system off by pressing the switch.
When the system is turned on the
warning light will illuminate for 3 sec-
onds on the outside rearview mirror.
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 30 km/h
(18.6 mph)
3.Other vehicles are detected in the
rear side
If a vehicle is detected within the
boundary of the system, a warning
light will illuminate on the outside
rearview mirror.
If the detected vehicle is not in detec-
tion range, the warning will be turned
off.
ODE056031
ODE056033
1st stage
Loading ...
Loading ...
Loading ...