Loading ...
Loading ...
Loading ...
643
Driving your vehicle
Warning message and warning
light
When the sensor cover or the sensor
lens is smudged with the foreign sub-
stances, such as snow or rain, the
AEB operation may temporarily stop.
In this case, the warning message
appears to warn the driver.
This is not a malfunction with the
AEB. To operate the AEB again,
remove the foreign substances.
If the AEB system cannot detect any
external object after engine ignition,
(when the vehicle is located in open,
empty surroundings) the AEB sys-
tem may not operate properly.
✽✽
NOTICE
• Do not install any accessories,
such as license plate molding or
sticker, on the sensor area. Nor
arbitrarily replace the bumper.
Those may adversely affect the
sensing performance.
• Always keep the sensor/bumper
area clean.
• Use only soft clothes to wash the
vehicle. Also, do not spray highly-
pressurized water on the sensor
installed on the bumper.
• Be careful not to apply unneces-
sary force on the frontal sensor
area. When the sensor moves out
of the correct position due to
external force, the system may not
normally operate even without the
warning light or message. In this
case, we recommend you to have
the vehicle inspected by an
authorized Kia dealer.
• Use only the genuine Kia sensor
cover. Do not arbitrarily apply
paint on the sensor cover.
System malfunction
• When the AEB is not working prop-
erly, the AEB warning light ( )
will illuminate and the warning
message will appear for a few sec-
onds. After the message disap-
pears, the master warning light
( ) will illuminate. In this case,
we recommend you to have the
vehicle inspected by an authorized
Kia dealer.
• The AEB warning message may
appear along with the illumination
of the ESC warning light.
ODE056078L
ODE056079L
Loading ...
Loading ...
Loading ...