Loading ...
Loading ...
Loading ...
246
In the event of a breakdown
Fitting a wheel
Ensure that the jack is stable. If the
ground is slippery or loose, the jack may
slip or drop – Risk of injury!
Take care to position the jack strictly at
one of the jacking points A or B under
the vehicle, ensuring that the head of the
jack is centred under the contact area on
the vehicle. Otherwise, there is a risk of
damage to the vehicle and/or of the jack
dropping – Risk of injury!
F Extend the jack 6 until its head comes
into contact with the jacking point A or B,
whichever is used; the contact area A or
B on the vehicle must be properly inserted
into the central part of the head of the jack.
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Fitting a steel or "space-saver" spare
wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting it is
normal to notice that the washers do
not come into contact with the steel or
"space-saver" spare wheel. The wheel
is secured by the conical contact of each
bolt.
Loading ...
Loading ...
Loading ...