Loading ...
Loading ...
Loading ...
8
241
In the event of a breakdown
Avoid removing any foreign bodies which
have penetrated into the tyre.
F Connect the pipe from the compressor to
the bottle of sealant.
F Remove the valve cap from the tyre to be
repaired, and place it in a clean area.
F Check that the compressor switch is at
position "O".
F Fully uncoil the electric cable, stowed under
the compressor.
Only the 12 V sockets located at the front
of the vehicle and in the boot can be used
to power the compressor.
The 12 V socket located at the back of
the centre console is not suitable for this
purpose.
F Affix the speed limit sticker.
The speed limit sticker must be secured
to the interior of the vehicle in the driver's
field of vision, to remind you that a wheel
is in temporary use.
F Turn the sealant bottle over and secure it in
the notch provided on the compressor.
F Connect the hose from the bottle of sealant
to the valve of the tyre to be repaired and
tighten firmly.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
The tyre inflation pressures are given on
this label.
Loading ...
Loading ...
Loading ...