Loading ...
Loading ...
Loading ...
8
243
In the event of a breakdown
F Check that the compressor switch is at
position "O".
F Fully uncoil the electric cable, stowed under
the compressor.
Only the 12 V sockets located at the front
of the vehicle and in the boot can be used
to power the compressor.
The 12 V socket located at the back of
the centre console is not suitable for this
purpose.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Switch on the ignition.
The tyre inflation pressures are given on
this label.
If a pressure of 2 bars is not reached
after 7 minutes, this indicates that
the tyre is not repairable; contact a
PEUGEOT dealer or a qualified workshop
for assistance.
F Once the correct pressure is reached, put
the switch to the "O" position.
F Remove the kit then stow it.
Do not drive more than 125 miles
(200 km) with the repaired tyre; see a
PEUGEOT dealer or a qualified workshop
to change the tyre.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on Under-inflation
detection, refer to the corresponding
section.
F Start the compressor by placing the switch
at position "I" and adjust the pressure to the
value shown on the vehicle's tyre pressure
label. To deflate: press the black button
located on the compressor pipe, near the
valve connection.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
Procedure for changing a damaged wheel with
the spare wheel using the tools provided with
the vehicle.
Loading ...
Loading ...
Loading ...