Loading ...
Loading ...
Loading ...
Rinnai Australia 5 Energysaver® - Operation & Installation Manual
DO NOT place containers of liquid on top of
the heater. Water spillage can cause
extensive damage to the appliance and may
result in electric shock.
A dedicated 240V earthed 10 Amp power
point must be used with this appliance.
DO NOT use power boards or double
adaptors to operate this appliance.
Heater must not be located below a power
socket-outlet.
This appliance must not be built-in.
The clearances shown must be maintained.
Access panel and Humidifier tray have to be
fitted while the heater is in use.
Rinnai recommend you fill the tray to the water
level indicator as marked. Take care not to
overfill.
Heat emanating from the front of this
appliance may over time affect the
appearance of some materials used for
flooring such as carpet, vinyl, cork or timber.
This effect may be amplified if the air in the
room contains cooking vapours or cigarette
smoke. To avoid this possibility, it is
recommended that a mat be placed in front of
the appliance, extending at least 750 mm in
front of the air outlet.
2
5
0
m
m
1000 mm
50 mm50 mm
TOP
FRONT
LEFT SIDE
RIGHT SIDE
Pull
Humidifier Tray
Gently Remove
Access Panel
Pull
AT LEAST
750mm
SAFETY
Loading ...
Loading ...
Loading ...