Loading ...
Loading ...
Loading ...
Maintenance
1008
Back-up lamp bulb replace-
ment
1. Open the liftgate.
2. Loosen the lamp assembly retain-
ing screws with a screwdriver.
3.Remove the rear combination
lamp assembly from the body of
the vehicle.
4.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Pull the bulb out of the socket.
6. Insert a new bulb into the socket.
7. Install the socket into the assem-
bly by aligning the tabs on the
socket with the slots on the
assembly and turning the socket
clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
OPS073031
OPS073032L
OPS073045
■ Type A
■ Type B
Loading ...
Loading ...
Loading ...