Loading ...
Loading ...
Loading ...
689
Driving your vehicle
The LDWS does not operate
when:
• The driver turns on the turn signal
or the hazard warning flasher to
change lane.
• Driving on the lane line.
✽✽
NOTICE
To change lanes, operate the turn
signal switch then change the lane.
The LDWS may not warn you
even if the vehicle leaves the
lane, or may warn you even if
the vehicle does not leave the
lane when;
• The lane is not visible due to snow,
rain, stain, a puddle or other envi-
ronmental conditions.
• The brightness of the outside
changes suddenly such as tunnel
enter/exit.
• The headlights are off at night or in
a tunnel.
• The color of the lane marking from
the road is difficult to distinguish.
• Driving on a steep grade or a
curve.
• Light such as street light, sunlight
or oncoming vehicle light reflects
from water on the road.
• The lens or windshield is stained
with foreign matter.
• The sensor cannot detect the lane
because of fog, heavy rain or
heavy snow.
• The surrounding of the inside rear
view mirror temperature is high
due to a direct ray of light.
• The lane is very wide or narrow.
• The lane line is damaged or indis-
tinct.
• The windshield is fogged by humid
air in the vehicle.
• The shadow is on the lane line by a
median strip.
• The sensor cannot distinguish the
lane from the road due to the
dust/dirt.
• There is a mark similar to a lane
line.
• There is a boundary structure.
• The distance from vehicle ahead is
very short or the vehicle ahead
drives hiding the lane line.
• The vehicle vibrates heavily due to
road conditions.
• The lane number increases or
decreases or the lane lines are
crossing.
WARNING - LDWS
Limitations
The Lane Departure Warning
System is a supplemental sys-
tem. Do not solely rely on the
system but always pay attention
and drive safely.
Loading ...
Loading ...
Loading ...